The Tools that you need are as follows:

screwdriver
tape measurer
spray paint
3 stakes

• Locate the center of the pool
• Place screwdriver in the center of the pool
• Extend tape measure half the length of the pool eg. 24' pool = 12' radius
• Touch the tape to the screwdriver and spray paint a circle. place one steak at each end of an oval pool
• The circle must meet "setback" distance obtained from permit office.
• Adjust screwdriver location as necessary
• Replace the screwdriver in the center of the pool with a stake, and also, place one where you want the filter installed and another where you want the excavated dirt.
  

*please note that the dirt removed must be within 40' away from pool location.